叶片工厂
叶片工厂, 也被称为聚合调理器, 冲刷, abrade and break down water-soluble silts and deleterious clays from contaminated ores, 粗大的岩石或沙子的饲料.
应用程序
![叶片磨轴与螺杆和桨的特写.](http://s3.us-east-1.amazonaws.com/utc-eng.com/images/Products/Wet/Aggregate-Conditioners/Knife-River-Stockton-Agg-Cond-4.jpg)
![现场双轴叶片磨机.](http://s3.us-east-1.amazonaws.com/utc-eng.com/images/Products/Wet/Aggregate-Conditioners/Twin-Shaft-Agg-Cond-Hanson-Lake-Bridgeport-Texas.jpg)
![输送机给料刀片磨.](http://s3.us-east-1.amazonaws.com/utc-eng.com/images/Products/Wet/Aggregate-Conditioners/Knife-River-Stockton-Agg-Cond-3.jpg)
跳转到:
磨刀机冲刷, 研磨和分解有害物质 using a combination of paddles and flights arranged in alternating format the entire length of the shaft to 冲刷, 研磨和分解有害物质. The shafts can have different configurations, but mainly feature alternating flights and paddles.
叶片工厂 sit on a slope of 0 to 5 degrees and have higher capacities compared to 粗料螺旋垫圈 of the same size. This is primarily due to the lower machine operating slope of the 叶片磨. 一般, the amount of water needed for a 叶片磨 is an additional third of the weight of material being processed.
A 叶片磨 is used where the material needs to be worked and wetted before it enters other wet processing equipment, 比如 振动筛, 细料螺旋垫圈 or 砂分级池. They are most often placed ahead of wash screens to improve screening efficiencies or in front of other wash equipment to improve the Sand Equivalency (SE).
Despite being very similar in appearance to 粗料螺旋垫圈, 刀片磨加工材料的方式不同. 例如, 所有进入盒子的材料, must exit through the discharge opening as there is no overflow weir. 没有溢流堰, material must be discharged into another piece of process equipment and cannot be put on a conveyor belt.
叶片工厂 are predominantly used for washing contaminated construction aggregate that needs to be scrubbed due to soundness or sand equivalency requirements, as well as many non-aggregate hard ores that contain water soluble clays and silts.
菠菜网最稳定正规平台_最全菠菜网大全 叶片工厂 are available in single and double shaft designs depending on capacity requirements. The smallest 20” (508 mm) diameter single shaft 叶片磨 can be used for capacities of 20 to 40 tph, while the larger 54” (1370 mm) diameter twin shafted machines can be used at capacities ranging from 600 to 1,000年tph energy. They sit at a slope of zero to five degrees and can achieve very high capacities as a result of the low slope.
叶片工厂 from 菠菜网最稳定正规平台_最全菠菜网大全 feature reversible paddles for maximum wear life. The ability to reverse the paddles keeps material in the box for longer, improving retention time. This flexibility is key if producers want to move the unit or feed it larger amounts of deleterious material.
Design elements featured on each 菠菜网最稳定正规平台_最全菠菜网大全 叶片磨 help keep operation and maintenance simple. A 360-degree section of flights and wear shoes located in the feed end can move material forward, 防止那个区域积聚. Screw shafts are made of extra-heavy steel pipe shaft with inner and outer renewable, 可逆耐磨硬铁桨. Those paddles are preceded and followed by heavy-duty steel flights, 配备螺栓连接的内部和外部可再生, 耐磨硬铁桨. Optional top covers are available, and drive guarding comes standard for personnel safety.
菠菜网最稳定正规平台_最全菠菜网大全 offers lab testing for potential 叶片磨 users at its 内部测试实验室.
而 叶片工厂 are very similar in appearance to 粗料螺旋垫圈,它们的功能大不相同. 刀片磨既可接受细料,也可接受粗料, 但它们并不是用来消除困难的, 塑料粘土. 叶片工厂 usually work in conjunction with another type of processing equipment, 比如 分类罐 或洗屏. 刀片磨和 粗料垫圈 is that any material and water that enter the 叶片磨 must exit through the discharge opening located at the bottom of the box opposite the incoming feed end. 刀片磨没有溢流堰.
当为您的应用确定刀片磨的尺寸时, consider the following: The type of clay/silt contamination that needs removed. 矿石/岩石进料粒度. 吨每小时喂固体的能力. The process flow and equipment location of required washer in your processing plant.
菠菜网最稳定正规平台_最全菠菜网大全 叶片工厂 feature reversible paddles for maximum wear life.